Sitemap
 
 
 
 
 
 

 

  Case Study: Stakeholder Mapping for Custom Hiring of Agricultural Machines in the Dry Zone of Myanmar

 

 

 

TRAINING MANUAL- Business Management of Custom Hiring of Agricultural Machinery in the Dry Zone
Developed as part of the project "An Integrated Rural Economic and Social Development Programme for Livelihoods Improvement in the Dry Zone of Myanmar"

 

 

  Training Manual for ANTAM Standard Code for Testing of Knapsack Misters-Cum-Dusters, December 2016

 

 

 

 

  Training Manual for ANTAM Standard Code for Testing of Power Tillers, October 2016

 

 

 

 

ANTAM Standard Code for Testing of Power Tillers, October 2016

 

 

 

 

ANTAM Standard Code for Testing of Powered Knapsack Misters-cum-dusters, October 2016

 

 

 

ANTAM TEST REPORT 每 Power Tillers, October 2016

ANTAM TEST REPORT 每 Powered Knapsack Misters-cum-dusters, October 2016

 

Agricultural Mechanization and Testing of Agricultural Machinery in the Asia-Pacific Region
This report is published under the overall guidance of ZHAO Bing, Head of the Centre for Sustainable Agricultural Mechanization (CSAM) of the United Nations Economic and Social Commission for Asia and the Pacific (UNESCAP). It was prepared by a core team led by AI Yuxin, Senior Expert of CSAM, who authored the Editorial and edited the publication. Main contributors to the substantive chapters are Dr. Gajendra Singh, Dr. Chan Chee Wan and Ms. HAN Xue respectively, consultants contracted by CSAM.

 

  Training Manual for ANTAM Standard Codes for Testing of Power Tillers
This training manual was put together by Mr. Chakradhar Chimote to facilitate the first trial implementation of ANTAM Codes by participating testing stations. Contents are based on ANTAM Standard Codes for Testing of Power Tillers developed at the 1st Technical Working Group (TWG) meeting of ANTAM held from 4 to 6 May 2015 in Serpong, Indonesia. The current ANTAM Codes will be submitted to the 2nd Annual Meeting of ANTAM for review and adoption in December 2015.

 

 

  Training Manual for ANTAM Standard Codes for Testing of Powered Knapsack Misters-Cum-Dusters
This training manual was prepared by Dr. Chan Chee-Wan and Dr. Jean-Paul David Douzals to facilitate the first trial implementation of ANTAM Codes by participating testing stations. Contents are based on ANTAM Standard Codes for Testing of Powered Knapsack Misters-Cum-Dusters developed at the 1st Technical Working Group (TWG) meeting of ANTAM held from 4 to 6 May 2015 in Serpong, Indonesia. The current ANTAM Codes will be submitted to the 2nd Annual Meeting of ANTAM for review and adoption in December 2015. 

 

 

ANTAM Standard Codes for Testing of Power Tillers

 

 

 

 

ANTAM Standard Codes for Testing of Powered Knapsack Misters-cum-dusters

 

 

 

 

The Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) 

 

 

 

ANTAM Codes Brochure (September 2015)

 

 

 

 

...........................................................................................................................................................................................................

3rd Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific
- Human Resource Development for Sustainable Agricultural Mechanization

This synthesis report comprises of the proceedings of the 3rd Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific, held on 9-11 December 2015 in Manila, the Philippines. It has been prepared by a team at the Centre of Sustainable Agricultural Mechanization (CSAM) under the overall guidance of Zhao Bing, former Head of CSAM, Katinka Weinberger, former Officer in Charge of CSAM, Li Yutong, Head of CSAM. The original presentations and speeches were provided by the respective participants/speakers.  

 

2nd Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific - Enabling Environment for Custom Hiring of Agricultural Machinery
This synthesis report is the proceedings of the 2nd Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific, held on 9-11 September 2014 in Serpong, Indonesia. It is prepared under the overall guidance of Zhao Bing, Head of CSAM, and with the collaboration of the CSAM team. The original presentations and speeches were provided by the respective participants /speakers.

 

 

Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific 2013   Public-Private Partnership for Improved Food Security and Rural Livelihoods
This synthesis report is the proceedings of the Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific, held on 26-27 October 2013, in Qingdao, China. It is prepared under the overall guidance of Zhao Bing, Head of CSAM, and the collaboration of the CSAM team. The original presentations and speeches were provided by their respective participants/speakers.

 

...........................................................................................................................................................................................................

Updates from CSAM (June 2017)  

 

 

 

Updates from CSAM (March 2017)  

 

 

 

Updates from CSAM (December 2016)  

 

  

 

Updates from CSAM (September 2016)

 

 

 

Updates from CSAM (June 2016)

 

 

 

Policy Brief: Promoting Custom Hiring of Agricultural Machines for Climate Resilient Agriculture in Myanmar's Dry Zone
This fact sheet was produced jointly by CSAM and CAPSA

 

 

Case Study: Policies, Institutions and Processes to Support Agricultural Mechanization Development in Myanmar*s Dry Zone
Developed as part of the project - An Integrated Rural Economic and Social Development Programme for Livelihoods Improvement in the Dry Zone of Myanmar

 

 

Policy Brief: Strengthening Policies, Institutions and Processes for Sustainable Agricultural Mechanization Development in Myanmar's Dry Zone
This fact sheet was produced jointly by CSAM and CAPSA

 

 

CSAM Policy Brief (Issue No.9, March 2016): Status of Agricultural Mechanization and Testing in Vietnam by Mr. Tran Duc Tuan, Deputy Director of Research Center of Agricultural Machinery & Air-Hydraulic, Vietnam Institute of Agricultural Engineering & Post Harvest Technology (VIAEP)

 

 

 

CSAM Newsletter (Issue No.1/2016)

 

 

 

 

CSAM Policy Brief (Issue No.8, December 2015): Agricultural Mechanization Research & Development in the Islamic Republic of Pakistan  by Dr. Tanveer Ahmad, Director, Agricultural and Biological Engineering Institute (ABEI), National Agricultural Research Centre (NARC), Pakistan

 

 

CSAM Newsletter (Issue No.4/2015)

 

 

 

CSAM Policy Brief (Issue No.7, September 2015): Re-design, Fabrication and Performance Evaluation of Manual Conical Drum Seeder: A Case Study by R.M. Chandima Ratnayake and B.M.C.P. Balasoriya. Reprinted with Permission of the American Society of Agricultural and Biological Engineers (ASABE- 2013)

 

 

 

CSAM Policy Brief (Issue No.6, June 2015): Agricultural Mechanization in Thailand by Mr. Viboon Thepent, Department of Agriculture, Thailand

 

 

 

CSAM Newsletter (Issue No.3/2015)

 

 

 

CSAM Newsletter (Issue No.2/2015)

 

 

 

CSAM Newsletter (Issue No.1/2015)

 

 

 

CSAM Policy Brief (Issue No.5, March 2015): Agricultural Mechanization Policies in the Philippines by Rossana Marie C. Amongo, Ph.D and Maria Victoria L. Larona, Ph.D

 

 

 

(4897kb) CSAM Policy Brief (Issue No.4, December 2014): Policy on Custom Hiring of Agricultural Machinery in Indonesia by Dr. Astu Unadi, Director, Indonesian Centre for Agricultural Engineering Research and Development (ICAERD), Indonesian Agency for Agricultural Research and Development (IAARD), Ministry of Agriculture, Indonesia(1), Dr. Trip Alihamsyah, Senior Researcher, ICAERD, IAARD, Ministry of Agriculture, Indonesia(2), Uing Budiarti, researcher, ICAERD, IAARD, Ministry of Agriculture, Indonesia(3)

 

 

(1652kb) CSAM Newsletter (Issue No.4/2014)

 

 

 

(5436kb) CSAM Newsletter (Issue No.2 & 3/2014)

 

 

 

(3285kb) CSAM Policy Brief (Issue No.3, September 2014): Status and Prospect of Agricultural Mechanization in Cambodia by Chan Saruth, Department of Agricultural Engineering, Cambodia(1), Lor Lytour, Royal University of Agriculture, Cambodia(2), Chao Sinh, Department of Agricultural Engineering, Cambodia(3)

 

 

(2303kb) CSAM Policy Brief (Issue No.2, June 2014): Trends of Agricultural Mechanization in India  by C. R. Mehta, Central Institute of Agricultural Engineering(1), N. S. Chandel, Central Institute of Agricultural Engineering(2), T. Senthilkumar, Central Institute of Agricultural Engineering(3), Kanchan K. Singh, Indian Council of Agricultural Research(4)

 

 

(1026kb) Inaugural Issue of CSAM Newsletter (Issue No.1/2014)

 

 

 

(1667kb) CSAM Policy Brief (Issue No. 1, January 2014) : Analysis of the Trends of Agricultural Mechanization Development in China (2000 - 2020) by Prof. BAI Renpu, China Agricultural University

 

 

CSAM Brochure (2013)

 

...........................................................................................................................................................................................................

(621kb) UNAPCAEM Policy Brief (Issue No. 2, May 每 August 2012) : Organic agriculture gains ground on mitigating climate change and improving food security: healthy food from healthy soil prepared by Mr. Eric Roeder, Economic Affairs Officer, UNAPCAEM; and informally edited by Mr. LeRoy Hollenbeck, Head / Senior Economic Affairs Officer, UNAPCAEM.

(514kb) UNAPCAEM Policy Brief (Issue No. 1, January 每 April 2012) : Urban Agriculture: Improving Food Security and Environmental Health of Cities prepared by Mr. Eric Roeder, Economic Affairs Officer, UNAPCAEM; and informally edited by Mr. LeRoy Hollenbeck, Head / Senior Economic Affairs Officer, UNAPCAEM.

...........................................................................................................................................................................................................

(5079kb) Agricultural Mechanization at a Glance
Selected Country Studies in Asia on Agricultural Machinery Development

This study was written by Dr. Peeyush Soni of Asian Institute of Technology and Dr. Yinggang Ou of South China Agricultural University with the funding from the United Nations Asian and Pacific Centre for Agricultural Engineering and Machinery (UNAPCAEM).

 

 

(6443kb) Rice Harvesting & Post-harvest Technologies in Myanmar- A Training Manual
This training manual is prepared by Dr. Athapol Noomhorm of the Asian Institute of Technology of Thailand (AIT) and Dr. Shuren Chen of Jiangsu University of China, and is designed for trainers from national institutes responsible for agricultural mechanization and transfer of technology on rice production, agricultural extension workers and government policy makers.

 

 

(2641kb) Dong Hongmin and Li Yu*e, 2010: Feasibility Study : Rural Household Biogas & Conservation Tillage CDM Project Development

...........................................................................................................................................................................................................

(484kb) Eight food insecurities faced by women and girl children: four steps that could make a difference, with special reference to South Asia (An Incomplete Draft) by Dr. Amitava Mukherjee
Paper for The Regional Conference on Child Poverty and Disparities at the invitation of UNICEF Regional Office for South Asia (6-8 May 2009, Katmandu, Nepal)
(255kb) Securing Food Security in the Asia-Pacific Region: A Partial Analysis by Dr. Amitava Mukherjee
(795kb) Agricultural Machinery Safety - a Perpetual Theme of Human Society by Dr.Amitava Mukherjee & Prof. Ping CHANG
(639kb) Food Insecurity : a Growing Threat in Asia by Dr. Amitava Mukherjee

...........................................................................................................................................................................................................

Proceedings of Regional Forum on Bioenergy Sector Development: Challenges, Opportunities, and Way Forward

 

 

 

Proceedings of International Seminar on Enhancing Extension of Conservation Agriculture Techniques in Asia and the Pacific (CA)

 

 

 

Proceedings of International Seminar on Restructuring R&D for Agricultural Engineering

...........................................................................................................................................................................................................

(47kb) Preface
(1112kb) A Feasibility Study on the Application of GREEN TECHNOLOGY FOR SUSTAINABLE AGRICULTURE DEVELOPMENT: Assessing the policy impact in selected member countries of UNAPCAEM

Training Manual on Mushroom Cultivation Technology Prepared by Professor Shu-Ting Chang, Emeritus Professor of Biology of The Chinese University of Hong Kong under contract with UNAPCAEM. Valuable comments have been offered by a number of persons from Professor G.Gantulga from Mongolia, Dr. S.K.Adhikary from Nepal, Dr. Kwang-Jae CHOE from ROK, and Prof. Ping CHANG of UNAPCAEM

...........................................................................................................................................................................................................

Agricultural Biotechnology-based(Green) Enterprise Development for Sustainable Rural Livelihoods and Economic Growth: Opportunities with Biofuel in Selected Asian Economies

 

 

 

 

Proceedings of International Seminar on Enhancing Export Competitiveness of Asian Fruits (Enhancing Export Competitiveness of Asian Fruits)

 

 

 

 

Proceedings of International Seminar on Biogas Technology for Poverty Reduction and Sustainable Development (Recent Developments in Biogas Technology for Poverty Reduction and Sustainable Development)

 

 

 

Agricultural Engineering in Support of the Kyoto Protocol - Clean Development Mechanism for Biogas Technology

 

 

 

Proceedings of International Forum on Development Strategy of Agricultural Equipment and Mechanization in Less Developed Regions

 

 

 

Proceedings and Papers Presented at APCAEM Regional Seminar on Post-Harvest Technology of Major Crops

 

 

 

 

  List of Presentations (2003-present)
  24-27 May 2017, Dhaka, Bangladesh
3rd Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) Technical Working Groups TWGs

13-15 April 2017, Nanjing, China
Regional Workshop for Research and Academic Institutions on: &Establishing a Cooperation Mechanism for Human Resource Development on Sustainable Agricultural Mechanization*

 8-10 December 2016, Negombo, Sri Lanka
3rd Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)

23-25 November 2016, Hanoi, Viet Nam
4th Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific

18-30 October 2016, Nanjing, China
The 2nd Training of Trainers on ANTAM Test Codes

Introduction to Testing of Powered Knapsack Misters-Cum-Dusters


16-18 July 2016,  Coimbatore, India
2nd Member Meeting of the Regional Council of Agricultural Machinery Associations in Asia and the Pacific (ReCAMA)

27-28 June 2016, Kunming, China
Asian and Pacific Workshop on Whole-Process Mechanization of Potato Production

10-13 May 2016, Bangkok, Thailand
2nd Meeting of ANTAM Technical Working Groups

9-11 December 2015, Manila, The Philippines
3rd Regional Forum on Agricultural Mechanization in Asia and the Pacific, 11th Session of the Governing Council and 11th Session of the Technical Committee of CSAM and 3rd ASEAN Conference on Agricultural and Bioystems Engineering Co-located with the 12th ERDT Conference in Agriculture

30 November - 01 December, 2015, Mandalay, Myanmar
Knowledge Sharing Workshop - Enabling Environment for Custom Hiring of Agricultural Machinery in the Dry Zone of Myanmar

26-28 October 2015, Qingdao, China
The 1st Member Meeting of the Regional Council of Agricultural Machinery Associations in Asia and the Pacific (ReCAMA)

27 July 2015 - 4 August 2015, Beijing, China
Training and Study Tour for Agricultural Machinery Distributors in Asia and the Pacific

17-19 November 2014, Siem Reap, Cambodia
The Tenth Session of the Technical Committee (TC) of CSAM & Regional Workshop on Establishing a Regional Database of Agricultural Mechanization in Asia and the Pacific

28-30 October 2014, Wuhan, China
Regional Roundtable of National Agricultural Machinery Associations in Asia and the Pacific - ※Connecting for Growth and Cooperation§

16-19 September 2014, Beijing, China
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)

9-11 September 2014, Serpong, Indonesia
2nd Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific - "Enabling Environment for Custom Hiring of Agricultural Machinery"

26 - 27 June 2014, Bangkok, Thailand
High-Level Multi-Stakeholder Consultation on Sustainable Agricultural Mechanization in Asia and the Pacific Region - ※Sustainable Mechanization Across the Food Chain§

26-27 October 2013, Qingdao, China
Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific - ※Public-Private Partnership for Improved Food Security and Rural Livelihoods§

17-18 October 2013, Bhopal, India
9th Session of the Technical Committee of CSAM


15-16 May 2012, Bangkok, Thailand
The Establishment of an ANTAM moves ahead at May 2012 meeting in Bangkok, Thailand


12-13 December 2011, Sanya, China
Regional Seminar on Rice Production and Mechanization


8-9 December 2011, Bangkok, Thailand
Sustainable Agricultural Mechanization Roundtable: Moving Forward on the Sustainable Intensification of Agriculture


26 July 2011, Bangkok, Thailand
Expert Group Meeting (EGM): Development of a sustainable agricultural machinery and farm implements testing network in the Asia-Pacific region


14-16 October 2009, Los Banos, the Philippines
The Fifth Session of the Technical Committee (TC) of UNAPCAEM & Expert Group Meeting on Application of Agricultural Machinery for Sustainable Agriculture in the Asia-Pacific Region


10-12 February 2009, Chiang Rai, Thailand
The fourth session of the Technical Committee of APCAEM

23-25 January 2008, Bangkok, Thailand
Regional Forum on Bioenergy Sector Development: Challenges, Opportunities and the Way Forward

20-23 November 2007, Beijing, China
The third sessions of the Governing Council and the Technical Committee of APCAEM

24-26 October 2007, Zhengzhou, China
International Seminar on Enhancing the Extension of Conservation Agriculture Techniques in Asia and the Pacific (English version) (Chinese version)
List of Papers
Study Reports by Contracted Consultants of APCAEM and Papers Presented at the Seminar


27-28 April 2007, Beijing, China
International Seminar on Restructuring and Strengthening Research and Development (R&D) for Agricultural Engineering

20-24 November 2006, Suwon, Republic of Korea
The second sessions of the Technical Committee and the Governing Council of APCAEM

22 November 2006, Seoul, Republic of Korea (ROK)
Roundtable Forum for Regional Agricultural Machinery Manufacturers/Distributors Associations

18-19 May 2006, Bangkok, Thailand
International Seminar on Enhancing Export Competitiveness of Asian Fruits

18-20 October 2005, Beijing, China
International Seminar on Biogas Technology for Poverty Reduction and Sustainable Development

5-7 April 2004, Beijing, China
International Seminar on ICT Applications for Agriculture and Rural Industry and Agro-Based Enterprise Development

24-25 March 2004, Beijing, China
International Seminar on Animal Feed and Biotechnology

3-5 November 2003, Kunming, China
Regional Seminar on Post-Harvest Technology for Major Crops



  ANTAM Publications (2013-2017)
 
ANTAM Codes
Test Report
Training Manual
Report
Brochure
Poster



   
 

(331kb) UNAPCAEM Policy Brief (Issue No.4, October 2009)
Advancing Agricultural Productivity in the Face of Increasing Water Insecurity: Innovating for the Future by Mr. Eric Roeder

(1376kb) UNAPCAEM e-Newsletter (Vol.3 , No.1, January 2008)
(603kb) UNAPCAEM Policy Brief (Issue No.3, January 2008)
Food Safety Issues in Agricultural Trade by Dr. Kyu-Hong CHOI

(594kb) UNAPCAEM Policy Brief (Issue No.2, November 2007)
Towards Sustainable Agriculture: Challenges and Opportunities by Prof. Ping CHANG
(1358kb) UNAPCAEM e-Newsletter (Vol.2 , No.1, June 2007)
(1445kb) UNAPCAEM Policy Brief (Issue No.1, June 2007)
Environmentally-Sound Rural Economic Growth: Policy Implications and Options for Bioenergy and Sustainable Agricultural Development by Dr. Joong-Wan CHO

UNAPCAEM e-Newsletter (Vol.1, No.1, November 2006)
UNAPCAEM Flyer (2006,2007)
UNAPCAEM Brochure (2004)

 

   
 

Agricultural Mechanization Strategy by Dr. Adrianus G. Rijk
The Law on Promotion of Agricultural Mechanization of the People's Republic of China by courtesy of Prof. Wang Maohua
Socially Equitable Mechanisation in Nepal by courtesy of Dr. Scott E.Justice

 

  Conservation Agriculture
 

1. Agricultural Engineering in Support of the Kyoto Protocol - The Clean Development Mechanism for Conservation Agriculture
2. Conservation agriculture, environmental and economic benefits by L. Garc赤a- Torres(1), A. Mart赤nez- Vilela(2), A. Holgado- Cabrera(3) & Emilio G車nzalez- S芍nchez(4)
3. Situation of Conservation Agriculture in Europe by Armando Mart赤nez Vilela
4. The environmental consequences of adopting conservation tillage in Europe: reviewing the evidence by J.M. Holland
5. The Paradigm of Conservation Agriculture by J. Dumanski(1), R. Peiretti(2), J. R. Benites(3), D. McGarry(4), and C. Pieri(5)
6. Weeds and Conservation Agriculture by J.D. NALEWAJA

 

 

  Links to: UNESCAP(Bangkok)  APCICT(Incheon)  APCTT(New Delhi)  CAPSA(Bogor)  SIAP(Chiba)

Copyright© 2017 CSAM | Legal Notice  Email: info@un-csam.org